How to Remove Bounced Emails From AWeber

AWeber has been handling bounces since before most of your subscribers had a smartphone, and it shows in the vocabulary. Dead addresses are not "bounced" or "cleaned" here. They are Undeliverable, a status that sits alongside Subscribed, Unconfirmed, and Unsubscribed in every list you own.
The status is clear. What happens next is less so. An Undeliverable subscriber stops receiving mail and keeps sitting in the list, in your searches, and in whatever export you hand to the next tool. If you run several lists, the same dead address can be Undeliverable in one and happily Subscribed in another. Here is where AWeber keeps bounces, how to export them with the rest of the list, how to clean the file in a few minutes, and how to keep the undeliverable count from climbing back.
Key takeaways
- AWeber marks hard bounces Undeliverable and stops mailing them. Repeated soft bounces end up there too.
- Filter Manage Subscribers by status to see and export the undeliverable addresses for one list at a time.
- Export the whole list, remove the undeliverable and unsubscribed rows, and re-import, then delete the originals so the count drops.
- Lists are independent. A dead address in one list is alive in every other list it belongs to.
Where AWeber keeps bounced subscribers
Open Subscribers > Manage Subscribers for the list you want to inspect. The search panel lets you filter by subscriber status. Choose Undeliverable and the view narrows to every address that has permanently failed. Each row keeps its original signup date, source, custom fields, and tags, which is useful when you want to know whether the dead weight came from one form or one import.
AWeber also reports bounces per message. In the reports area for broadcasts and campaign messages, each send has delivered, bounced, and complained counts. That view is good for diagnosing a bad send. The Manage Subscribers filter is the one you use for cleaning, because it covers the whole list regardless of which message killed the address.
There is no account-wide bounce list. Every list keeps its own statuses. If you run four lists, you have four Undeliverable views to check.
How AWeber treats hard and soft bounces
AWeber applies the standard split and resolves it into one status.
| What happened | What AWeber does | Status |
|---|---|---|
| Mailbox or domain does not exist | Stops sending immediately | Undeliverable |
| Mailbox full, server down, message deferred | Retries; counts as a soft bounce for that message | Subscribed |
| Soft bounces repeat across several sends | Stops sending | Undeliverable |
| Recipient marks the message as spam | Stops sending; logs a complaint | Unsubscribed |
The result is tidy. Anything AWeber has given up on is Undeliverable; anything the recipient gave up on is Unsubscribed; everything in between is still Subscribed and still being tried. The reasoning behind the hard and soft split is in hard bounce vs. soft bounce. The AWeber-specific point is that the platform does not delete anything. Undeliverable and Unsubscribed subscribers stay in the list until you remove them, which keeps your history intact and your subscriber count inflated.
AWeber gets the hard part right. It stops mailing dead addresses the moment they fail, and it refuses to re-add anyone who unsubscribed. Your job is the part it leaves alone: getting the dead rows out of the count, and out of every other copy of the list you keep.
Export the undeliverable subscribers and the full list
- In Manage Subscribers, filter by status Undeliverable. Use the export control to download the result as CSV. Name it for the list, such as
aweber-newsletter-undeliverable.csv. - Change the filter to Unsubscribed and export again. These people asked to leave. They belong in your suppression files so they never return by way of a re-import.
- Clear the filter and export the entire list. Confirm that custom fields and tags are included; the export options let you choose.
- Repeat for each list you mail from. AWeber does not merge lists on export.
AWeber prepares larger exports in the background and notifies you when the file is ready. On a list of 30,000 that is usually a few minutes. If you also have bounce or complaint exports from a previous platform or a CRM, gather them now. Everything that identifies a dead or departed address goes into the same cleanup.
Filter and export the Undeliverable subscribers
In Subscribers > Manage Subscribers, filter by status Undeliverable and export the result as CSV. Repeat for Unsubscribed.
Export the full list
Clear the filter and export the whole list with custom fields and tags included. Repeat for every list you mail from.
Clean the file
Upload the full list as the original and the Undeliverable and Unsubscribed exports as suppression files. Download the cleaned CSV with every column intact.
Delete the dead rows in AWeber
Filter by Undeliverable again, select all, and delete so the subscriber count actually drops. Or import the cleaned CSV into a fresh list and re-point your forms.
Repeat monthly
Check the Undeliverable filter after each month of sends and run the same cleanup on any file before importing it.
Clean the list in one pass
Open Email List Refresh, start a project, and upload the full list export as the original. Add the Undeliverable export, the Unsubscribed export, and any other suppression files you gathered. The service finds the email column in each file on its own, so the different layouts between AWeber's exports and, say, a Mailchimp cleaned-contacts file do not matter.
Addresses are matched without regard to case and de-duplicated across all suppression files before removal. Every row that survives keeps every column: name, signup date, ad tracking, custom fields, tags. Download the cleaned CSV and the removed-rows report.
A worked example: a 30,000-subscriber list with 1,100 Undeliverable and 2,400 Unsubscribed comes back with 26,500 rows. That is the list of people who can and want to receive your mail. Whether you then run the survivors through a verification service is a separate decision; verification vs. suppression cleaning explains why suppression comes first.
Re-import and remove the dead rows
AWeber's import, under Subscribers > Add Subscribers, adds new subscribers and updates matching ones. It does not remove anyone missing from the file. Re-importing the cleaned CSV over the existing list therefore changes nothing about the Undeliverable rows; they are still there.
Two routes finish the job.
- Delete in place. Filter Manage Subscribers by Undeliverable, select all, and delete. Do the same for Unsubscribed if you want them out of the count, though many senders keep unsubscribes in AWeber precisely so the platform blocks any attempt to re-add them. This preserves the history of every surviving subscriber and skips the re-import entirely.
- Fresh list. Create a new list, import the cleaned CSV, and move your sign-up forms, campaigns, and integrations to it. Cleaner, but AWeber may ask new imports to confirm, and anything wired to the old list needs re-pointing.
For most AWeber users the delete-in-place route is faster. The cleaned CSV is still worth producing: it is the file you will hand to any other system that holds the same audience.
Keep the undeliverable count from climbing back
- Leave confirmed opt-in on. AWeber built its reputation on it. A mistyped address never confirms and never bounces. If you turned it off to boost signups, reconsider the trade.
- Clean imports before they land. Any file from a store, event, or spreadsheet goes through the suppression cleanup first, with your Undeliverable and Unsubscribed exports as the suppression files.
- Check the Undeliverable filter monthly. It takes 30 seconds. A sudden jump after one send points at a reputation or content problem rather than list decay; see sender reputation explained.
- Run a re-engagement series before deleting the silent. Subscribers who have not opened in a year are the next Undeliverable cohort. Give them one chance, then let them go.
AWeber gotchas
- One list, one set of statuses. Cleaning your main newsletter list does nothing for the three legacy lists from past product launches. Clean all of them or consolidate.
- Deleting an unsubscribe can undo it. An Unsubscribed row is also AWeber's block against re-adding that person. If you delete it and later import a file containing the address, they are subscribed again. Keep a suppression file of unsubscribes outside AWeber if you plan to delete the rows.
- Subscriber counts and billing. How Undeliverable and Unsubscribed subscribers count toward your plan depends on your plan. Check the billing page rather than assuming they are free.
- Re-imports may trigger confirmation. Importing to a new list can require subscribers to re-confirm, and some will not. Deleting in place avoids that entirely.